Fabric Gift Bag RFQs: Check the Usable Opening

Nov 11, 2026 | Industry Trends

Fabric Gift Bag RFQs: Check the Usable Opening

Will a rigid gift box pass through the bag opening?

Ask Rongchang to test the exact gift box in a sample of the quoted fabric bag. The Embroidered Fabric Bag listing gives “30 x 27.5 cm” as its dimensions. It does not define the axes, measuring points or usable opening. Request those definitions from the supplier, then send the outer dimensions and shape of the item you need to pack. Ask for evidence that the item can pass through the opening, sit in the intended position and be removed in the way your packing team plans to use it.

The catalogue images show the fabric gathered near the top of the bag. That makes the entry path worth checking on a sample. A flat measurement across the fabric and a measurement across the space a rigid carton must pass through answer different questions. The photo can help point out the area to measure. The supplier’s marked dimensions and a physical trial can tell you whether the quoted sample accommodates your item.

Pink embroidered fabric gift bag held by its handle with fabric gathered along the top
Mark where the supplier should show the opening in its normal loading position.

Define the item and how it will be loaded

Send the gift box’s finished outside width, height and depth with its lid in place. Include anything that changes its outside profile, such as a sleeve, tab or ribbon that will already be attached at the packing station. If you have a sample, give it a reference and identify which face should be visible when the box sits in the bag. A square carton and a wide, shallow carton can need different entry paths even if one of their outside dimensions is the same.

State which directions the packing team can use. A slight turn may be acceptable for a boxed accessory, while a product presentation with a specific upright position may require a straight insertion. Ask the supplier to record the orientation it tried. If the operator can load the item only by turning it or moving another part aside, your team can decide whether that step belongs in the packing instructions.

Use the intended production carton or a rigid sample that matches its shape. When sending a mock-up, identify it as a mock-up and note what differs from the final item. A dimensioned sample that omits a projecting closure or a finished sleeve could make the first trial easier than the eventual packing operation.

Gold-tone embroidered gift bag with a tassel at the left of the gathered opening
Use the image to agree which area should be visible during the item insertion trial.

Request the opening measurements and an insert trial

Ask the supplier to mark the points behind the two catalogue dimensions on a photo or drawing of the offered bag. Next, ask for the opening at the position it recommends for loading, with a view that shows where the measuring tool is placed. If the opening shape changes as it is held, request the opening condition used for the measurement. Record the smallest passage the item encounters along the agreed loading path, using the supplier’s evidence to define where that is.

Buying field Ask the supplier to show Buyer’s record
Catalogue dimensions Endpoints and axes for the listed 30 x 27.5 cm. Marked image tied to the quoted bag.
Usable opening Opening condition, measuring points and any narrower passage in the agreed loading path. Measured clearance and loading position.
Item and orientation The identified sample or mock-up entering in the agreed direction. Item revision and orientation used in the trial.
Seated fit and removal How the item rests and how an operator takes it out. Accepted result or a note on where the trial stops.

Ask for a short sequence showing the item at the entry, after it has passed through and once it is seated. A final picture alone misses the part where a corner may catch. Have the supplier include removal in the same trial, especially if the item will be unpacked for inspection or demonstration. Keep any visible contact with the fabric or handle area in the sample notes so the buyer can decide whether it affects routine handling.

Gold-tone fabric gift bag held upright with a tassel shown at the right
Ask the supplier to show the tested item seated inside the same quoted bag version.

Retain one approval record for each configuration

Link the result to the quoted bag version and the reference for the item that was tested. If more than one bag colour or construction appears on the quote, ask which lines use the same opening construction and which require a separate check. The images show different appearances. Ask the supplier to state the scope of any shared measurement instead of assigning the same result to every quote line yourself.

  • Send the gift item’s outside dimensions, orientation and sample reference.
  • Retain the supplier’s marked bag dimensions and evidence of the opening condition.
  • Record the insertion, seated fit and removal result against the exact bag and item revisions.

Share that record with the team that will pack the product. If the gift box or the bag changes before ordering, send the updated references to the Rongchang contact team and ask whether the trial should be repeated. Agree on the evidence the team will use before it releases the order.

Buyer FAQ

Can I compare the catalogue size with my carton dimensions?

You can use the listed size for an initial inquiry. Ask the supplier to define the measurement and check the actual loading path with your item before approval.

Should I send a full gift sample?

A rigid mock-up can support a preliminary check if it matches the finished outside shape. Identify any missing parts that could affect insertion or removal.

What if the item passes through but sits too high?

Record entry and seated fit separately. Ask the supplier to show where the item rests and compare that position with your agreed presentation or packing requirement.

wholesale embroidered fabric bag with bamboo-knot handles and tasselsB2B supplier sample record

Get a Free Quote

Fill in the form and we'll get back to you within 24 hours.